Ratches

turns any 3/8 drive tool into a ratchet. 3/8 drive finish: Chrome Alloy Steel chrome plated reversible 20 teeth

The telescopic function makes it easier to reach the torque when the shaft is extended. When pushed together it is compact ideal for mobile tool storage. In combination with matching sockets it is also a convincing alternative to the classic wheel spider. 1/2 square...

Repair kit for the Ratchet 863HP.

Contains the best selling 3/8 drive tools in a foam insert: ✔ Spin type speeder 8812U✔ Sliding T-handle 8815 ✔ Reversible ratchet 8816P ✔ Universal joint 8820 ✔ Extension 8821-1 (1 long)✔ Extension 8821-3 (3 long)✔ Extension 8821-6 (6 long)✔ Wobble extension 8822-3 (3 long)✔ Wobble extension 8822-10 (10 long) The foam insert fits...

Application:Slim design e.g. for the installation and removal of timing chain covers Reaches even extremely hard to reach spaces and tolerates high manual retightening forcesFor manual retightening with torque values up to 400 NmReduced vibrationsAir connection inlet: Inside thread 12.91 mm (1/4″)Coupler plug: Nominal...

• Square drive 6,3 mm - 1/4" acc. to DIN 3120 - C 6.3, ISO 1174• Used throughout industry and the automotive world - and as well in confined spaces• reversible• with QuickRelease safety lock• fine tooth with 80 teeth• for use in confined...

1/2" drivefinish: Chrome Alloy Steel, chrome platedreversible80 teethwith QuickRelease safety lockwith 2-component handlefor use in confined spaces, re-engages after movement of 4.5°construction without screws prevents foreign object damageDIN 3122/ISO 3315registered design

Sturdy workshop construction - especially suitable for continuous operation in industrial production processes Extra-strong head made of especially heat-treated special steel Sturdy ratchet head suitable for high permanent stress (series production and the like) Completely closed head avoids the entry of swarf etc. Long...

Replacement set for shift lever for 1/2" ratchets consisting of:ratchet wheel, pawl, shift lever, screws, ball, compression spring, spring washer, circlip For HAZET torque wrench 5121-2 CT ∙ 5122-2 CT ∙ 5123-2 CT5121-3 CT ∙ 5122-3 CT ∙ 5123-3 CT5121-2 CLT ∙ 5122-2 CLT ∙ 5123-2 CLT ∙ 5128-2 CLT5122 ST-16121 CT ∙ 6122 CT ∙ 6123 CT6121-1 CT ∙ 6122-1 CT...

HAZET Safety-Insert-System (SIS) Suitable for HAZET assistant tool trolleys 173, 179, 179 W, 179 BIG-1, 179 XL, 179 XXL, 179 A XXL, 179 T XXL and 180 with a drawer depth of 398 mmDrive: Square, hollow 12.5 mm (1/2 inch)Output: Outside 12-point traction profile, Inside hexagon profile, Internal serration profile XZNOrder system size:...

Application:Small operating angle (4°) enables use in the tightest spaces, e.g. engines, mechanical engineering, agricultural vehicles and machinery, renewable energies (solar, wind turbines) HiPer With safety locking- Release-secure locking by push-button actuation Quick release of the attached tool by pressing the release button with...

Application:Small operating angle (4°) enables use in the tightest spaces, e.g. engines, mechanical engineering, agricultural vehicles and machinery, renewable energies (solar, wind turbines) HiPer max. torque 400Nm Locking function of the lever prevents unwanted switch Longer lifetime by using the latest lubricants in the...

Application:Small operating angle (4°) enables use in the tightest spaces, e.g. engines, mechanical engineering, agricultural vehicles and machinery, renewable energies (solar, wind turbines) HiPer 1,000 Nm load, almost double the DIN specs Locking function of the lever prevents unwanted switch Longer lifetime by using...

Combination ratcheting spanners OPEN-RATCHSizes 8-19mmReversible ratchet Bi-hexagon (12 point)72 teeth ratchetFor work in confined spacesTight ratchet angle of only 5°Ring end offset by 15°Chrome Alloy SteelChrome plated.

Reaction-free pneumatic impact ratchet for loosening and tightening screw connections in areas with restricted access Reaction-free High torque values - approx. 30% above standard products Speed level - approx. 3 x higher than standard products Non-rebound mechanism for low impact work Suitable for hand retightening with...

For hand retightening with torque values > 60 Nm 360° exhaust (adjustable) Completely closed head avoids the entry of swarf etc. Reduced vibrations Cold insulated handle Air inlet thread: 12,91 mm (1/4″) Coupler plug: nominal size 7.2 (included) Hose diameter (recommended): 10 mm Working pressure...

For hand retightening with torque values > 60 Nm 360° exhaust (adjustable) Completely closed head avoids the entry of swarf etc. Reduced vibrations Cold insulated handle Air inlet thread: 12,91 mm (1/4″) Coupler plug: nominal size 7.2 (included) Hose diameter (recommended): 10 mm Working pressure...

For hand retightening with torque values > 260 Nm 360° exhaust (adjustable) Completely closed head avoids the entry of swarf etc. Reduced vibrations Cold insulated handle Air inlet thread: 12,91 mm (1/4″) Coupler plug: nominal size 7.2 (included) Hose diameter (recommended): 10 mm Working pressure...

Especially suitable for commercial vehicles agricultural machinery and industrial installations Hardened and tempered special steel! Shank diametre: 15 mm Long lever arm reducing the expenditure of force Non-slip 2-component handle for optimal handling i drive 12.5 mm = 1/2 Ratchet wheel 32 teeth Surface: chrome-plated DIN 3122 ISO...

Replacement set for ratchet wheel HINOX 6.3 = 1/4 iconsisting of: ratchet wheel pawl shift lever screws ball compression springfor 863 X