Reca
-
Vendor:Reca Norm
RECA Green Knipex Slip joint pliers 250 mm
For nuts and screws from 10 - 32 mm (3/8" up to 1 1/4 inch) in size; self-locking from 17 - 32 mm: no slipping on workpiece; energy-saving. Zero backlash gripping of metric or imperial hex head screws; no stripping of screw heads. Gripping...- $49.99 USD
- $49.99 USD
- (-0%)
- Unit price
- per
-
Vendor:Reca Norm
RECA Green Knipex siphon and connector wrench with plastic jaws. 250 mm
For siphons, plastic pipes and connectors to Ø 80 mm. Fine adjustment for optimal fit on a wide range of diameters (functions such as RECA Cobra pipe wrenches).Robust, withstands high loads.Ideal for tightening and loosening of siphon connectors, plastic pipe connectors and round union...- $75.57 USD
- $75.57 USD
- (-0%)
- Unit price
- per
-
Vendor:Reca Norm
Reca Stabila Torpedo Spirit Level 360 25cm
The functional, robust RECA spirit level RECA Torpedo 360 is not only compact and has an extra strong rare earth magnet, it also has a rotating angle bubble that can be adjusted 360°. In addition, the spirit level has a vertical and a horizontal...- $82.11 USD
- $82.11 USD
- (-0%)
- Unit price
- per
-
Vendor:Reca Norm
RECA wire stripping gun, 0.2–6 mm²
For solid, multiple-stranded and fine-stranded wire from 0.2 - 6.0 mm² with standard insulation. Automatically adjusts to different wire cross-sections and therefore prevents damage to wires. Light, manageable design for ease of use. Slim head for use in hard-to-reach areas with wire cutters for...- $78.34 USD
- $78.34 USD
- (-0%)
- Unit price
- per
-
Vendor:Reca Norm
RECA Ultra bit ratchet set for 1/4'' bits
Practical bit ratchet set, 16 pcs, in a belt pocket for use on the go. All drives are immediately at hand High-performance bit ratchet with 1/4-inch holder (E6.3) and 180° angle mechanism for maximum torque up to 50 Nm Minimal effort thanks to perfect...- $147.76 USD
- $147.76 USD
- (-0%)
- Unit price
- per
-
Vendor:Reca Norm
RECA Green Ultra Screwdriver Set 7 pcs.. TORX®
Advantages: Flexible plastic chambers embedded in the handle ensure a perfect fit in any hand.Up to 30% greater force transfer than conventional handles.Drive symbol on handle cap.The molybdenum vanadium steel blades are tempered and particularly impact resistant to prevent splintering and injuries.Handles: Anti-roll protection in...- $107.10 USD
- $107.10 USD
- (-0%)
- Unit price
- per
-
Vendor:Reca Norm
RECA Green Precision machine vice with V-block
Precision-milled and polished Accuracy to within 0.1 mm Strong construction made of special cast iron Optimum clamping thanks to two offset V-type jaws In accordance with DIN 6370 Length guide in the entire clamping range Jaws width 80 mm Jaws height 30 mm Height...- $196.35 USD
- $196.35 USD
- (-0%)
- Unit price
- per
-
Vendor:Reca Norm
RECA Green circlip pliers set 4 pieces dip-insulated
With return spring (only for outer ring). Reinforced tips. Material: Tool steel, tempered. Dipped grip protection for an excellent grip. Content remark: 1 size 2 for internal and external rings (A2/A21/J2/J21).- $101.15 USD
- $101.15 USD
- (-0%)
- Unit price
- per
-
Vendor:Reca Norm
RECA Green machinist's hammer with ash handle DIN 1041
The hammer head is electro-inductively hardened and thus offers optimal impact hardness without chipping Double curved painted ash shaft for guaranteed good handling Handle secured by ring wedge sealed with synthetic resin- From $15.47 USD
- From $15.47 USD
- (-0%)
- Unit price
- per
-
Vendor:Reca Norm
RECA Ultra bit ratchet for 1/4'' bits
High-performance ratchet with 1/4 inch holder (E6.3) and 180° angle mechanism for maximum torque up to 50 Nm Minimal effort thanks to perfect geometry Super-powerful ratchet mechanism with 48 teeth (right-fixed-left) and a swivel angle of 7.5° With tried-and-tested RECA ultra gel handle, which...- $39.65 USD
- $39.65 USD
- (-0%)
- Unit price
- per
-
Vendor:Reca Norm
RECA Green 2C pliers set #1 4 pcs.
Fully oil-hardened and annealed. Material: Special tool steel. Thick, 2-component plastic shells. Chrome-plated head. Content remark: RECA combination pliers, 180 mm RECA heavy-duty side cutters, 180 mm RECA snipe nose pliers, straight, 200 mm RECA Cobra water pump pliers, 250 mm- $165.41 USD
- $165.41 USD
- (-0%)
- Unit price
- per
-
Vendor:Reca Norm
RECA Green Mastergrip pipe wrench 2''
Easy and in particular rapid use easy to apply to pipe with one hand self-adjusts to pipe diameter. Can be removed with one hand. The fixed teeth are applied at differing radii and guarantee optimum grip on any diameter of pipe. Also provides a...- $70.21 USD
- $70.21 USD
- (-0%)
- Unit price
- per
-
Vendor:Reca Norm
RECA Green Mastergrip pipe wrench 1 1/2''
Easy and in particular rapid use easy to apply to pipe with one hand self-adjusts to pipe diameter. Can be removed with one hand. The fixed teeth are applied at differing radii and guarantee optimum grip on any diameter of pipe. Also provides a...- $58.31 USD
- $58.31 USD
- (-0%)
- Unit price
- per
-
Vendor:Reca Norm
RECA Green 2C pliers set #2 4 pcs.
Fully oil-hardened and annealed. Material: Special tool steel. Thick 2-component plastic shells. Chrome-plated head. Content remark: RECA combination pliers 180 mm RECA side cutters 180 mm RECA wire stripping pliers 160 mm RECA radio pliers 160 mm- $153.51 USD
- $153.51 USD
- (-0%)
- Unit price
- per
-
Vendor:Reca Norm
RECA Green tool carry case with aluminium handle
With sturdy aluminium handle. Tool carrying box made from hard-wearing plastic. Two large compartments provide space for tools and other items. Dimensions: L 42 cm x W 27 cm x H 27 cm. Item weight 1 kg shipping weight 6 kg- $25.69 USD
- $25.69 USD
- (-0%)
- Unit price
- per
-
Vendor:Reca Norm
RECA Green Universal & Carpet Cutter replacement blades
The RECA trapezoidal blade is made of high-quality hardened carbon steel. and has been polished on both sides. The blades come in a convenient dispenser/box — each blade can be pushed out individually. Content remark: Box includes 10 blades. Advice: All blades are polished...- $7.74 USD
- $7.74 USD
- (-0%)
- Unit price
- per
-
Vendor:Reca Norm
RECA Green Universal & Carpet Cutter Knife
Robust die cast zinc housing. With five replacement blades (trapezoidal blades) in the interior reserve magazine. Extremely robust. Comfortable shape and surface. Advice: All blades are polished on both sides!- $11.90 USD
- $11.90 USD
- (-0%)
- Unit price
- per
-
Vendor:Reca Norm
RECA Green spirit level
Reliable spirit level with a slim design and unique level mounting. The level, level block and the measuring surfaces are precisely aligned with each other and permanently bonded with a synthetic resin. The level block is made of shatter-proof acrylic glass that is easy...- From $34.51 USD
- From $34.51 USD
- (-0%)
- Unit price
- per
-
Vendor:Reca Norm
RECA Green WERA bit handle for 1/4'' bits
RECA bit holder is suitable for bits with a 1/4 hexagon head drive in accordance with DIN ISO 1173-C 6.3. A magnet is integrated into the hexagon socket mounting which holds the bit. The multiple-component Kraftform handle is equipped with anti-roll-off protection. This is...- $20.66 USD
- $20.66 USD
- (-0%)
- Unit price
- per
-
Vendor:Reca Norm
RECA Green Quintus pliers 180 mm
Quintus pliers combine 5 functions in only 1 set of pliers. Cutting, stripping, squeezing, crimping and clamping Advantages: Serrated gripping surfaces hold objects securely and firmly. Easily strip wires or crimp wire end ferrules and insulated flat connectors (wire cross-sections 0.5/1.5/2.5 mm²) The blade...- $65.45 USD
- $65.45 USD
- (-0%)
- Unit price
- per
-
Vendor:Reca Norm
RECA Green Knipex Pliers Wrench
Pliers and wrench in one tool. Material: Chromium-vanadium electric steel hardened. Field of Application: Wherever sensitive surfaces must not be damaged or scratched (e.g. plastic stainless steel brass chrome-plated surfaces and screw connections). For carrying out simple presses. Advantages: Parallel smooth gripping jaws =...- From $75.92 USD
- From $75.92 USD
- (-0%)
- Unit price
- per
-
Vendor:Reca Norm
RECA Soft-Face Hammer Ultra Alu
Patented protective hammers with 3-component high-security handle and aluminium middle section. This makes the soft-face hammer noticeably lighter and especially suitable for targeted metered work with easy gentle handling. The white polyamide inserts are connected to the middle section by a double-securing fastening system....- From $51.94 USD
- From $51.94 USD
- (-0%)
- Unit price
- per
-
Vendor:Reca Norm
RECA Green Knipex mechanic's nippers / end cutting nippers
Material: Special tool steel oil-hardened. Polished head. Advantages: For twisting and cutting binding wire from a reel in one step. Long slim shape for deep insertion into meshwork. Dipped grip protection for a secure grip.- From $28.56 USD
- From $28.56 USD
- (-0%)
- Unit price
- per
-
Vendor:Reca Norm
RECA Green WERA Mag-Bit20 magazine screwdriver
Magazine screwdriver with extendable telescopic mount. The telescopic mount with stainless steel sleeve is fitted with a snap ring and a powerful permanent magnet. It can also be removed completely and used in the cordless drill. The handle with roll-off protection has a magazine...- $81.06 USD
- $81.06 USD
- (-0%)
- Unit price
- per
-
Vendor:Reca Norm
RECA Green Knipex lever bolt cutter 160mm
Inductively hardened precision blades work on the centre cutting principle. Cutting hardness approx. 64 HRC. Material: Chromium-vanadium tool steel, hardened.- $53.55 USD
- $53.55 USD
- (-0%)
- Unit price
- per
-
Vendor:Reca Norm
RECA Green Knipex Alligator Pliers
Gripping surfaces with special hardened teeth, hardness of teeth approx. 61 HRC: permanently secure grip due to high wear resistance. Perforated joint: highly robust thanks to double guide. Material: Chromium-vanadium electric steel, hardened. Dipped grip protection for an excellent grip. Advantages: Self-locking on pipes and...- From $34.70 USD
- From $34.70 USD
- (-0%)
- Unit price
- per
-
Vendor:Reca Norm
RECA Green Knipex Cobra Pliers
Gripping surfaces with special hardened teeth, hardness of teeth approx. 61 HRC: permanently secure grip due to high wear resistance. Material: Chromium-vanadium electric steel, hardened. Dipped grip protection for an excellent grip. Advantages: Gaspipe and water pump pliers in one tool. Self-locking on pipes and...- From $29.74 USD
- From $29.74 USD
- (-0%)
- Unit price
- per
-
Vendor:Reca Norm
RECA Green Side cutters 2-component handle 160 mm
Fully oil-hardened and annealed. Cutting hardness approx. 62 HRC. Material: Special tool steel. Chrome-plated head. Advantages: Blades for hard and soft wire. Long cutting edges for thicker cables. Blades also inductively hardened. Thick, 2-component plastic shells. Length 160 mm Max. hard wire diameter cutting...- $38.08 USD
- $38.08 USD
- (-0%)
- Unit price
- per
-
Vendor:Reca Norm
RECA Green Side cutters 2-component handle 145 mm
Fully oil-hardened and annealed. Cutting hardness approx. 62 HRC. Material: Special tool steel. Chrome-plated head. Advantages: Blades for hard and soft wire. Long cutting edges for thicker cables. Blades also inductively hardened. Thick, 2-component plastic shells. Length 140 mm Max. hard wire diameter cutting...- $33.32 USD
- $33.32 USD
- (-0%)
- Unit price
- per
-
Vendor:Reca Norm
RECA Green Combination pliers 2-component handle 205 mm
Fully oil-hardened and annealed. Cutting hardness approx. 60 HRC. Material: Special tool steel. Chrome-plated head. Advantages: Blades for hard and soft wire. Long cutting edges for thicker cables. Blades also inductively hardened. Thick, 2-component plastic shells. Hardened teeth for demanding requirements. Slim gripping jaws...- $38.08 USD
- $38.08 USD
- (-0%)
- Unit price
- per
-
Vendor:Reca Norm
RECA Green Combination pliers 2-component handle 185 mm
Fully oil-hardened and annealed. Cutting hardness approx. 60 HRC. Material: Special tool steel. Chrome-plated head. Advantages: Blades for hard and soft wire. Long cutting edges for thicker cables. Blades also inductively hardened. Thick, 2-component plastic shells. Hardened teeth for demanding requirements. Slim gripping jaws...- $33.32 USD
- $33.32 USD
- (-0%)
- Unit price
- per
-
Vendor:Reca Norm
RECA Green Combination pliers 2-component handle 165 mm
Fully oil-hardened and annealed. Cutting hardness approx. 60 HRC. Material: Special tool steel. Chrome-plated head. Advantages: Blades for hard and soft wire. Long cutting edges for thicker cables. Blades also inductively hardened. Thick, 2-component plastic shells. Hardened teeth for demanding requirements. Slim gripping jaws...- $28.56 USD
- $28.56 USD
- (-0%)
- Unit price
- per
-
Vendor:Reca Norm
RECA Green Drill hole marker
For marking drill holes and hard-to-reach areas. The stainless steel tip is 2.5 mm wide and 25 mm long. This makes the marker ideal for assembly work. A special head tip prevents slipping in if pressing on too hard. Water-resistant on almost all surfaces....- $13.88 USD
- $13.88 USD
- (-0%)
- Unit price
- per
-
Vendor:Reca Norm
RECA Green WERA BIT BOY handle 1/4''
Ergonomic BiT BOY handle provides both high torque transfer and secure handling. The new innovative Bit-Click mounting system is integrated in the handle.- $38.40 USD
- $38.40 USD
- (-0%)
- Unit price
- per
-
Vendor:Reca Norm
RECA Green WERA BIT BOY Big21 17 pieces in belt bag
Ergonomic BiT BOY handle provides both high torque transfer and secure handling. The innovative Bit-Click quick-change mounting system is integrated in the handle and enables quick bit changes. The folding bag contains 89-mm long bits for universal use. These are suitable for hand and...- $87.77 USD
- $87.77 USD
- (-0%)
- Unit price
- per
-
Vendor:Reca Norm
RECA Green Deep-hole marker
Deep-hole marker with automatic lead feed (2 mm). Highly durable design — tip, housing and clip made of metal. Ideal for drilling and assembly work. The leads (diameter 2.8 mm) can be sharpened using a sharpener integrated in the cap. For marking on wood,...- $24.75 USD
- $24.75 USD
- (-0%)
- Unit price
- per
-
Vendor:Reca Norm
RECA Green - 12-pack Marking Chalks (red blue yellow or white)
Contains 12 marking chalks of one color. Choose white yellow red or blue. For marking dry and wet wood metal stone concrete brick paper cardboard plastics and tarmac. Ideal for position markings. Weather-resistant light-fast labelling. Unpapered.- $17.08 USD
- $17.08 USD
- (-0%)
- Unit price
- per
-
yellow
-
white
-
blue
-
red
-
Vendor:Reca Norm
RECA Green IMPACT L-handle wrench set 9 pcs. hexagonal/ball head
Chromium-vanadium steel, bright nickel-plated, fully hardened Long version Advantages: Ball head for recessed or poorly accessible hexagon socket screws at angles of up to 30°. Contents Hex (mm) 1.5/2/2.5/3/4/5/6/8/10- $44.03 USD
- $44.03 USD
- (-0%)
- Unit price
- per
-
Vendor:Reca Norm
RECA Green Holder for marking chalks
Chalk holder for marking chalk. Sturdy construction - made entirely of aluminium with a practical clip. Suitable for round and hexagonal chalks with a diameter of 1-12 mm. Protects hands and clothing against contamination and chalk against breakage. Form: Round Length of pin: 115...- $32.80 USD
- $32.80 USD
- (-0%)
- Unit price
- per
-
Vendor:Reca Norm
RECA Green hacksaw frame with saw blade 150 mm
Blade length 150mm (6) Replacement blades available- $17.73 USD
- $17.73 USD
- (-0%)
- Unit price
- per
-
Vendor:Reca Norm
RECA Green Permanent marker (black/blue/red)
Available in three colors: black blue and red Permanent markers filled with ink. For permanently labelling and marking light surfaces. Light-resistant and quick-drying. For marking on smooth surfaces such as plastic metal glass rubber wood paper and cardboard. Min./max. line thickness: 1.5-3 mm Shape...- $4.76 USD
- $4.76 USD
- (-0%)
- Unit price
- per
-
Black
-
Blue
-
Red
-
Vendor:Reca Norm
RECA Green Multi Handle Screwdriver 07019991
The new 2-component multi-handle with metal injection moulded element makes it easy to switch between screwdriver and T-handle configurations without changing the blade. Works with any 6.35 mm (=1/4 inch) hex bit or screwdriver insert (any brand). Also available in completes sets. All screwdriverinserts...- $33.30 USD
- $33.30 USD
- (-0%)
- Unit price
- per
-
Vendor:Reca Norm
RECA Green Pipe Deburrer 8-35 mm
Inner/outer reamer for easy and quick deburring.Special arrangement of 3 ground and hardened steel cutters for chatter-free work. For stainless steel steel copper aluminium and hard plastic pipes from 8-35 mm- $91.14 USD
- $91.14 USD
- (-0%)
- Unit price
- per
-
Vendor:Reca Norm
RECA Green Pipe Deburrer 10-56 mm
Inner/outer reamer for easy and quick deburring.Special arrangement of 3 ground and hardened steel cutters for chatter-free work. For stainless steel, steel, copper, aluminium and hard plastic pipes from 10-56 mm- $102.59 USD
- $102.59 USD
- (-0%)
- Unit price
- per
-
Vendor:Reca Norm
RECA Green WERA bit nut setter set ''All-in-One'' 39 pcs.
This compact 39-piece bit and socket set features a multitude of tools in a compact format. It is a universal companion for many screwing applications at work, for sports, in the home and during leisure activities. The set comprises a bit ratchet, mini screwdriver handle,...- $127.91 USD
- $127.91 USD
- (-0%)
- Unit price
- per
-
Vendor:Reca Norm
RECA Green Reca Norm Multi-mechanism cassette screwdriver set 12 pieces 0701 901 1
The new 2-component multi-handle with metal injection moulded element makes it easy to switch between screwdriver and T-handle configurations without changing the blade. Contains: Interchangeable bits: AF 7 - AF 8 - AF 10 - AF 13 HEX 3/HEX 4, HEX 5/HEX 6 PH...- $158.97 USD
- $158.97 USD
- (-0%)
- Unit price
- per
-
Vendor:Reca Norm
RECA Green Multi-mechanism cassette screwdriver set 12 pieces
The new 2-component multi-handle with metal injection moulded element makes it easy to switch between screwdriver and T-handle configurations without changing the blade. Contains: Interchangeable bits: PH 1/slotted 4.0 x 0.6, PH 2/PH 3, PZ 1/slotted 5.0 x 0.8, PZ 2/slotted 6.0 x 1.0,...- $154.78 USD
- $154.78 USD
- (-0%)
- Unit price
- per
-
Vendor:Reca Norm
RECA Green Multi screwdriver set in belt pouch
The new 2-component multi-handle with metal injection moulded element makes it easy to switch between screwdriver and T-handle configurations without changing the blade. Contains: Interchangeable bits: PH 1/slotted 4.0 x 0.6, PH 2 PH 3, PZ 1/slotted 5.5 x 0.8, PZ 2/slotted 6.0 x...- $125.83 USD
- $125.83 USD
- (-0%)
- Unit price
- per
-
Vendor:Reca Norm
RECA Green Multi M-Tec - Cassette screwdriver set 20 pieces
The new 2-component multi-handle with metal injection moulded element makes it easy to switch between screwdriver and T-handle configurations without changing the blade. Contains: Interchangeable bits: AF 5.5 - AF 6 - AF 7 - AF 8 - AF 10 - AF 13 -...- $179.33 USD
- $179.33 USD
- (-0%)
- Unit price
- per
-
Vendor:Reca Norm
RECA Green Knipex siphon and connector wrench with plastic jaws 250 mm
For siphons, plastic pipes and connectors to Ø 80 mm. Fine adjustment for optimal fit on a wide range of diameters (functions such as RECA Cobra pipe wrenches).Robust, withstands high loads.Ideal for tightening and loosening of siphon connectors, plastic pipe connectors and round union...- $75.57 USD
- $75.57 USD
- (-0%)
- Unit price
- per
